Thecus N2800を購入しますた。
CPUはIntel Atom D2700でメモリ2GB。HDDは付いてませんが2台まで内蔵可能。LAN端子も2つあるので、家庭用のファイルサーバ兼ルータみたいな使い方がメインでしょうか。
最初から1GBのストレージにLinuxベースのNASのソフトウェアが入っていて、電源とネットワークだけ繋いだ後、他のPCからウェブブラウザで設定するようになっています。
が、それ以外はまったく普通のPCなので、ディスプレイ（アナログ）やらUSBキーボード・マウスやらUSB光学ディスクドライブやらを繋いで他のOSを動かすことも可能です。起動時にF2だったかを押せばよくあるBIOSの設定画面になります。
せっかくのNASのソフトウェアがもったいないですし、PCとしての性能は微妙ですので、Windows動かすとかそういう用途にはお勧めはしませんが。
というわけで（？）、お約束のNetBSDのdmesgなど。
なお、wd1, wd2は、本体とは別に買って取り付けたHDDです。あと、uhidev0は、そのへんにあったDELLのキーボードです。
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007, 2008, 2009, 2010, 2011, 2012
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 6.0_RC1 (GENERIC)
total memory = 2003 MB
avail memory = 1930 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
Intel Corporation Milstead Platform (2.2)
mainbus0 (root)
cpu0 at mainbus0 apid 0: Intel(R) Atom(TM) CPU D2700 @ 2.13GHz, id 0x30661
cpu1 at mainbus0 apid 1: Intel(R) Atom(TM) CPU D2700 @ 2.13GHz, id 0x30661
cpu2 at mainbus0 apid 3: Intel(R) Atom(TM) CPU D2700 @ 2.13GHz, id 0x30661
cpu3 at mainbus0 apid 2: Intel(R) Atom(TM) CPU D2700 @ 2.13GHz, id 0x30661
ioapic0 at mainbus0 apid 1: pa 0xfec00000, version 20, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <PTL ,OEMTABLE,00000002>, AslId <PTL ,00000002>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
pckbc1 at acpi0 (PS2K, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (PS2M, PNP0F13) (aux port): irq 12
FWHD (INT0800) at acpi0 not configured
LDRC (PNP0C02) at acpi0 not configured
CDRC (PNP0C02) at acpi0 not configured
attimer1 at acpi0 (TIMR, PNP0100): io 0x40-0x43,0x50-0x53 irq 0
UAR1 (PNP0501) at acpi0 not configured
UAR2 (PNP0501) at acpi0 not configured
acpivga0 at acpi0 (GFX0): ACPI Display Adapter
acpiout0 at acpivga0 (DD01, 0x0001): ACPI Display Output Device
acpiout1 at acpivga0 (DD02, 0x0002): ACPI Display Output Device
acpiout1: brightness levels: 0 10 20 30 40 50 60 70 80 90 100
acpiout2 at acpivga0 (DD03, 0x0003): ACPI Display Output Device
acpiout3 at acpivga0 (DD04, 0x0004): ACPI Display Output Device
acpiout4 at acpivga0 (DD05, 0x0005): ACPI Display Output Device
acpiout5 at acpivga0 (DD06, 0x0006): ACPI Display Output Device
acpiout6 at acpivga0 (DD07, 0x0007): ACPI Display Output Device
acpiout7 at acpivga0 (DD08, 0x0008): ACPI Display Output Device
acpivga0: unknown output device acpiout0
acpivga0: unknown output device acpiout1
acpivga0: unknown output device acpiout2
acpivga0: unknown output device acpiout3
acpivga0: unknown output device acpiout4
acpivga0: unknown output device acpiout5
acpivga0: unknown output device acpiout6
acpivga0: unknown output device acpiout7
acpivga0: connected output devices:
acpivga0: 0x0400: Unknown Output Device, head 0
PDRC (PNP0C02) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C-170): ACPI Power Button
acpibut1 at acpi0 (SLPB, PNP0C0E): ACPI Sleep Button
PTID (INT340E) at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x8086 product 0x0bf3 (rev. 0x03)
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x0be2 (rev. 0x09)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
drm at vga0 not configured
uhci0 at pci0 dev 26 function 0: vendor 0x8086 product 0x3a37 (rev. 0x00)
uhci0: interrupting at ioapic0 pin 16
usb0 at uhci0: USB revision 1.0
ehci0 at pci0 dev 26 function 7: vendor 0x8086 product 0x3a3c (rev. 0x00)
ehci0: interrupting at ioapic0 pin 18
ehci0: EHCI version 1.0
ehci0: companion controller, 2 ports each: uhci0
usb1 at ehci0: USB revision 2.0
hdaudio0 at pci0 dev 27 function 0: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 22
hdafg0 at hdaudio0: Intel product 2880
hdafg0: HDMI00 8ch: Digital Out [Jack]
hdafg0: 8ch/0ch 48000Hz PCM16*
ppb0 at pci0 dev 28 function 0: vendor 0x8086 product 0x3a40 (rev. 0x00)
ppb0: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci1 dev 0 function 0: Intel i82574L (rev. 0x00)
wm0: interrupting at ioapic0 pin 16
wm0: PCI-Express bus
wm0: 256 word (8 address bits) SPI EEPROM
wm0: Ethernet address 00:14:fd:16:64:14
ukphy0 at wm0 phy 1: OUI 0x000ac2, model 0x000b, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb1 at pci0 dev 28 function 1: vendor 0x8086 product 0x3a42 (rev. 0x00)
ppb1: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
wm1 at pci2 dev 0 function 0: Intel i82574L (rev. 0x00)
wm1: interrupting at ioapic0 pin 17
wm1: PCI-Express bus
wm1: 256 word (8 address bits) SPI EEPROM
wm1: Ethernet address 00:14:fd:16:64:15
ukphy1 at wm1 phy 1: OUI 0x000ac2, model 0x000b, rev. 1
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb2 at pci0 dev 28 function 2: vendor 0x8086 product 0x3a44 (rev. 0x00)
ppb2: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci0 dev 28 function 3: vendor 0x8086 product 0x3a46 (rev. 0x00)
ppb3: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci0 dev 28 function 4: vendor 0x8086 product 0x3a48 (rev. 0x00)
ppb4: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x1033 product 0x0194 (USB serial bus, interface 0x30, revision 0x04) at pci5 dev 0 function 0 not configured
ppb5 at pci0 dev 28 function 5: vendor 0x8086 product 0x3a4a (rev. 0x00)
ppb5: PCI Express 1.0 <Root Port of PCI-E Root Complex>
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
uhci1 at pci0 dev 29 function 0: vendor 0x8086 product 0x3a34 (rev. 0x00)
uhci1: interrupting at ioapic0 pin 23
usb2 at uhci1: USB revision 1.0
uhci2 at pci0 dev 29 function 1: vendor 0x8086 product 0x3a35 (rev. 0x00)
uhci2: interrupting at ioapic0 pin 19
usb3 at uhci2: USB revision 1.0
uhci3 at pci0 dev 29 function 2: vendor 0x8086 product 0x3a36 (rev. 0x00)
uhci3: interrupting at ioapic0 pin 18
usb4 at uhci3: USB revision 1.0
ehci1 at pci0 dev 29 function 7: vendor 0x8086 product 0x3a3a (rev. 0x00)
ehci1: interrupting at ioapic0 pin 23
ehci1: EHCI version 1.0
ehci1: companion controllers, 2 ports each: uhci1 uhci2 uhci3
usb5 at ehci1: USB revision 2.0
ppb6 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x90)
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled
ichlpcib0 at pci0 dev 31 function 0: vendor 0x8086 product 0x3a16 (rev. 0x00)
timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000
ichlpcib0: 24-bit timer
ichlpcib0: TCO (watchdog) timer configured.
ahcisata0 at pci0 dev 31 function 2: vendor 0x8086 product 0x3a22 (rev. 0x00)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 6 ports, 32 slots, CAP 0xe720ffc5<EMS,CCCS,PSC,SSC,PMD,ISS=0x2=Gen2,SCLO,SAL,SALP,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
atabus2 at ahcisata0 channel 2
atabus3 at ahcisata0 channel 3
atabus4 at ahcisata0 channel 4
atabus5 at ahcisata0 channel 5
ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x3a30 (rev. 0x00)
ichsmb0: interrupting at ioapic0 pin 18
iic0 at ichsmb0: I2C bus
isa0 at ichlpcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
attimer1: attached to pcppi0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat 0 us, pow 0 mW
acpicpu0: T0: I/O, lat 1 us, pow 0 mW, 100 %
acpicpu0: T1: I/O, lat 1 us, pow 0 mW, 88 %
acpicpu0: T2: I/O, lat 1 us, pow 0 mW, 76 %
acpicpu0: T3: I/O, lat 1 us, pow 0 mW, 64 %
acpicpu0: T4: I/O, lat 1 us, pow 0 mW, 52 %
acpicpu0: T5: I/O, lat 1 us, pow 0 mW, 40 %
acpicpu0: T6: I/O, lat 1 us, pow 0 mW, 28 %
acpicpu0: T7: I/O, lat 1 us, pow 0 mW, 16 %
coretemp0 at cpu0: thermal sensor, 1 C resolution
acpicpu1 at cpu1: ACPI CPU
acpicpu2 at cpu2: ACPI CPU
acpicpu3 at cpu3: ACPI CPU
coretemp1 at cpu3: thermal sensor, 1 C resolution
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub1 at usb1: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhub4 at usb5: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 6 ports with 6 removable, self powered
uhub5 at usb4: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub5: 2 ports with 2 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
ahcisata0 port 1: device present, speed: 3.0Gb/s
ahcisata0 port 2: device present, speed: 3.0Gb/s
wd0 at atabus0 drive 0
wd0: <AFAYA MDS 1GB>
wd0: drive supports 1-sector PIO transfers, LBA addressing
wd0: 967 MB, 1965 cyl, 16 head, 63 sec, 512 bytes/sect x 1980720 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) (using DMA)
wd1 at atabus1 drive 0
wd1: <WDC WD20EARX-00PASB0>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(ahcisata0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd2 at atabus2 drive 0
wd2: <WDC WD20EARX-00PASB0>
wd2: drive supports 16-sector PIO transfers, LBA48 addressing
wd2: 1863 GB, 3876021 cyl, 16 head, 63 sec, 512 bytes/sect x 3907029168 sectors
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd2(ahcisata0:2:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
umass0 at uhub4 port 5 configuration 1 interface 0
umass0: Generic Flash Card Reader/Writer, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Multiple, Card Reader, 1.00> disk removable
sd0: drive offline
sd0: unable to open device, error = 19
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio0 at pad0: half duplex, playback, capture
raid0: RAID Level 1
raid0: Components: /dev/wd1a /dev/wd2a
raid0: Total Sectors: 3907026944 (1907728 MB)
boot device: raid0
root on raid0a dumps on raid0b
root file system type: ffs
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: Dell Dell USB Entry Keyboard, rev 2.00/5.02, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)